Learning Outcomes

Oil Contamination and Maintenance Strategies

Filters and Gauges

Purification of Lube Oil

Testing of Lube Oil

Rotary Pumps

Lesson Summary

This module discusses aspects of equipment necessary in maintaining maritime systems effectively. Learn about oil contamination and maintenance strategies as well as the purification process. You will also study rotary pumps as a positive displacement pump.

Maritime Equipment for System Maintenance - Course Assessment

Learn about oil contamination and the maintenance of equipment used in maritime systems from this free online course.

Maritime Equipment for System Maintenance

Are you a marine engine engineer or technician looking for the perfect equipment required to maintain engines correctly? Look no further! This course on the maintenance of maritime systems investigates the purification and testing of lubes and positive displacement pumps in depth. By the end of this course, you will be self-confident and better equipped to carry out maintenance procedures on diesel engine systems.

You can clean basic mineral oil using a purifier with water washing and remove water and solid contaminants. However, for detergent lubricating oils with low water, clarification is needed. As these oils contain oil-soluble detergent additives, there is a risk of emulsification during water washing. ‘Maritime Equipment for System Maintenance’ is a course that takes a comprehensive look at these procedures, explaining how purification should be used only in consultation with an oil supplier. We teach you the different maintenance requirements relating to the propulsion engine, auxiliary machinery and cargo handling equipment. Discover how the maintenance of lubricating oil occupies one of the essential roles in the care of engines. We will lead you through a regular examination and testing of circulating oil in the engine system. You will also learn about the installation and post-installation processes you carry out after a major system overhaul. We explain the types of contaminants you should remove immediately from a system and the oil maintenance procedures used for their removal.
Filters on board ships are provided in all ancillary systems such as cooling water, lubricating oil, fuel oil and air systems. You will study how filters aid the removal of foreign dirt particles and ensure the smooth flow of fluids. Gauges and meters are measuring instruments that you use for measuring parameters like pressure, temperature, the volume of flow, level measurement, speed, velocity and so on. This course describes how gauges and meters are employed on shipboard to control and monitor various ship machinery’ parameters. As a marine engineer, it is necessary to identify symbols representing filters, gauges and meters described in this course. You will get to know more about lubricating oil purifiers for diesel or turbine lubrication plants, typically arranged to operate on a continuous bypass system. We illustrate the concept of representative sampling, vital for carrying out onboard tests. You will investigate how to take oil samples from the main supply line before entering into the engine because the condition of the oil supplied to the engine is incredibly important. 
Lastly, this online course takes you through the idea behind the rotary pump. This positive displacement pump moves liquid by using a rotating assembly called rotors in the static casing. The pump traps liquid in its closed casing with the help of rotors and discharges a smooth flow. Determine how a rotary pump handles almost any liquid that does not contain hard and abrasive solids, including viscous liquids. We will introduce you to the concept of self-priming and its capability in creating a high vacuum. The rotary pump consists of a static casing and one or more rotors actuated by relative rotation of the driving shaft. It does not require suction and delivery valve arrangement as in the reciprocating pump. The most common rotary pump used onboard is a gear pump. We will steer you through the various classification of the rotary pump and the principles of the rotary pump code. You will learn about the static casing in a rotary pump and the main component of a rotary gear pump. This course discusses the importance of particular checks when the pump starts, while it runs and when it stops. ‘Maritime Equipment for System Maintenance’ is a course of significant interest to students, researchers, maritime personnel and anyone seeking to improve their knowledge and skills in managing maritime systems. Enrol today and begin your next learning experience!

Duolingo Q1 2026: Toward 100M DAUs with Record Engagement and Slower Paid Growth

9 Best TensorFlow Courses for 2025

Udemy vs Coursera: Comparing Online Learning Giants that IPO’d in 2021

Udemy Faces Instructor Backlash Over Widespread Course Rating Glitch

7 Best Sketch Courses for 2025

Coursera Q4 2025: 197M Learners, ~$197M Revenue, ~$27M in Losses

7 Best Technical Writing Courses to Master Documentation and Communication

Chasing 100M Daily Users, Duolingo Reconsiders Ads, Paying Influencers, and Its Most Expensive Plan

Udemy’s Fourth Leadership Exit of 2025: CMO Genefa Murphy Resigns

The Rise of AI Search: ChatGPT Surpasses DuckDuckGo, Threatens Bing

Udemy’s Last CEO Quietly Moves On: Joins a Tax & Compliance Company as CEO

7 Best TikTok Marketing Courses for 2025

10 Best Go (Golang) Courses for 2025

Udemy’s 2021: Half a Billion Revenue, B2B Revenue Soars, B2C Plateaus

Harvard Launches Two New Free Certificate Courses

40+ Free Certificates from Wolfram U: Expand Your Computational Universe

Aims & Objectives of ISO/IEC 17025:2017

Accrediting to ISO/IEC 17025:2017

Main Sections of ISO/IEC 17025:2017

This module presents the fundamental aspects of ISO/IEC 17025:2017 along with its aims and objectives. The module also explains different forms of standardized verbs used throughout the standard. Moreover, you will also learn the benefits of accrediting to ISO/IEC 17025. Lastly, an overview of the section's standard is also given.

General and Structural Guidelines for Laboratories

Resource Requirements for Testing Laboratories

Contracts, Validation, Sampling & Handling

Technical Records, Uncertainty, Results Validity, & Reports

In this module, you will encounter the essential requirements given in clauses 4, 5, 6, and 7 of ISO/IEC 17025;2017. However, the explanation of Clause 7 is provided till sub-clause - 7.8. Through this module, you will learn about the general, structural, resource, and process requirements of ISO/IEC 17025:2017.

Information Management, Complaints & Nonconformities (NCs)

Management System Requirements

Taking Corrective Actions

In this module, you will see discussions on ISO/IEC 17025:2017 beginning from sub clause 7.9 that puts forward the complaint requirements put forth by the standard. Furthermore, it presents the standard's requirements regarding management systems. Moreover, it also contains necessary measures to be taken for corrective actions.

ISO/IEC 17025:2017 - Laboratory Management System- Course Assessment

Learn about laboratory management systems laid out by the ISO 17025 international standard in this free online course.

ISO/IEC 17025:2017 - Laboratory Management Systems

This short course is designed for individuals and laboratories looking forward to their standardisation. We explain management standards defined by the ‘ISO/IEC 17025 general requirements for testing and calibration laboratories competence’ devised by ISO. This comprehensive course explains all the basic and essential requirements of the standard. It also provides a simplified clause-by-clause explanation of its four main sections.

Fundamentals of Pest Control

Pest Identification and Assessment

Non-Chemical Pest Control Methods

Chemical Pest Control Methods

This module will teach you the fundamentals of pest control, types of pests and their impact, pest life cycles and behavior, factors influencing pest infestations, pest identification and assessment, non-chemical pest control methods, genetic control and sterile insect, chemical pest control methods, and integrated pest management (IPM) approach.

Monitoring and Prevention

Sustainable Pest Management

Urban and Structural Pest Control

Topics you will learn in this module include but are not limited to pest monitoring techniques, preventive measures and exclusion strategies, ecological impact of pesticides, selective pesticide use and resistance management, organic and biodynamic pest management, pest management in residential areas, and commercial and industrial pest control.

Pest Control and Management - Assessment

This free online course teaches you how to use chemical and non-chemical pest control techniques to manage infestations.

Pest Control and Management

Pests make environments unhygienic and are a major cause of diseases, some of which may be lethal and difficult or expensive to cure. Effective pest management and control are necessary to keep a living and working environment free from health hazards. This course provides the knowledge and skills required to establish and maintain a successful pest control management programme and describes various pests, their life cycles and their behaviour.

Foundations of Construction Safety Management

Safety Management for Hazardous Environments

High-risk Site Activities and Demolition Safety

This module covers risk identification and mitigation in construction work and how to evaluate and manage risk in compliance with CDM regulations. You'll also learn how behaviour affects safety on construction sites, including safety measures for scaffolding, excavation, demolition and more.

Course Assessment - Site Management Safety Training Scheme (SMSTS)

Learn how to manage safety on construction sites in accordance with UK legal provisions in this free online course.

Site Management Safety Training Scheme (SMSTS)

Construction workers are often vulnerable to injuries and hazards so ensuring safety is maintained consistently is crucial for both site managers and workers. This course covers the essential knowledge needed for maintaining safety on construction sites. You'll learn to identify and assess risks while adhering to UK industry regulations. In addition, we'll discuss safety measures to take during erecting scaffolding, excavations and demolitions.

Introduction to Hot Work

Classification of Hot Work Areas

Roles and Responsibilities

Hot Work Permit

Hot Work Risk Assessment

Essential Safety Precautions

This module will familiarize you with hot work processes, including their potential hazards and safety precautions. You'll learn how to assess the risks associated with hot work and determine appropriate control measures. You'll also understand the hot work permit system and the roles & responsibilities of those involved in the permitting process.

Hot Work Safety - Course Assessment

Learn how to manage the hazards associated with hot work processes in this free online health and safety course.

Hot Work Safety

This hot work safety training equips you with the essential knowledge to recognize and mitigate hot work hazards. You'll understand the hot work risk assessment process and hierarchy of controls for effectively reducing risks. The course explains the hot work permit system along with the roles and responsibilities of those involved in the permitting process. You'll also gain a clear understanding of hot work permitted and prohibited areas.

Introduction to Traffic Marshalling

Traffic Management

Temporary Traffic Control

Traffic Risk Assessment

Vehicle Signaling

Reversing Vehicles

Health and Safety

In this module, we will look at the fundamental objectives of traffic marshalling and the general duties of a traffic marshal. A traffic marshal's responsibilities when controlling traffic on a highway or construction areas shall be examined. Assessing risks along with health and safety concerns of traffic near construction areas will be assessed.

Construction Safety: Traffic Marshalling - Course assessment

Train as a traffic marshal or bankman who provides traffic management on construction sites in this free online course.

Construction Safety: Traffic Marshalling

This course takes an in-depth look at the role of traffic marshals on construction sites. Traffic management is important to maintaining health and safety as the presence of heavy machinery and large vehicles creates a need for the efficient direction of traffic. Traffic management in such a busy area faces hazards and safety risks, which we identify in this course. Sign up to train as a traffic marshal or bankman and add a skill to your CV.

Introduction to the AS Standards

Organization's Context and Leadership

QMS Planning and Support

This module introduces students to the AS standards for suppliers of the aviation industry. It explains the importance of regulations in the aerospace industry and navigates them through the journey of different AS standards. It also explains the requirements of Clauses 4, 5, 6, and 7 of this standard.

Organizational Operations

Operations and Evaluation

Organizational Improvement

This module explains the requirements of Clauses 8, 9, and 10 of AS9100D. These requirements are regarding organizational operations, evaluation, and continuous improvement of the organizational operations.

AS9100D Quality Management System (QMS) for Aerospace Industry - Course Assessment

Learn the requirements of AS9100D for the developers and suppliers of components for the aerospace & defense industries.

AS9100D Quality Management System (QMS) for Aerospace Industry

This course explains different clauses and their various requirements for the organizations that develop, design, or supply parts, components, and assemblies concerned with the aerospace and defense industries. After enrolling, the students will be able to navigate the differences between the different versions of the AS standards. Moreover, they will also get a simple and straightforward explanation of this standard's requirements.

Introduction to Hazardous Materials Handling - Learning Outcomes

Understanding Hazardous Materials

Legal and Regulatory Compliance

Importance of Hazard Communication

Risk Assessment and Management

Personal Protective Equipment (PPE) for Hazardous Materials Handling

Introduction to Hazardous Materials Handling - Lesson Summary

In this module, participants will have a solid foundation in understanding hazardous materials, legal and regulatory compliance, hazard communication, risk assessment, and the proper use of personal protective equipment. This knowledge is essential for creating a safe and compliant working environment in industries dealing with hazardous materials.

Hazardous Materials Storage and Transportation - Learning Outcomes

Proper Storage Practices for Hazardous Materials

Managing Segregation and Compatibility of Hazardous Materials

Emergency Preparedness for Hazardous Materials Storage

Transportation Regulations

Handling Hazardous Materials in Transit

Emergency Response Planning

Case Studies and Lessons Learned

Hazardous Materials Storage and Transportation - Lessons Summary

This module covers storing hazardous materials, segregation and compatibility, and developing emergency response plans. Learn DOT regulations, proper labelling, packaging, and security measures for transportation, best practices for loading/unloading and case studies.

Advanced Hazardous Materials Handling Techniques - Learning Outcomes

Decontamination Procedures

Confined Space Entry Protocols

Managing Hazardous Waste

Best Practices for Chemical Spill Response

Continuous Improvement in Hazardous Materials Handling

Advanced Hazardous Materials Handling Techniques - Lesson Summary

This module covers decontamination techniques to ensure health, safety, and regulatory compliance. Learn to manage decontamination zones, handle confined space hazards, and apply physical, chemical, thermal, and radiological decontamination. Develop skills in PPE selection, emergency response planning, and environmental protection.

Hazardous Materials Handling Mastery - Course Assessment

Gain expertise, ensure safety, and excel in hazardous materials handling with this comprehensive free online course.

Hazardous Materials Safety Specialist

This course covers the classification, legal compliance, and risk assessment of hazardous materials. It delves into communication standards, PPE usage, and storage guidelines. Transportation regulations and emergency response planning are also covered. Advanced techniques include decontamination, confined space entry, hazardous waste management, chemical spill response, and continuous improvement through safety audits and case studies.